The process of affixing furniture paper:

Clean the home base layer, fill the gap → gypsum board joint seam joint seam strip, make up putty, sanding paper → full putty, smoothing → brushing moisture-proof agent → brushing primer → wall elastic line → wallpaper immersion → wallpaper , base layer painting adhesive → wallpaper paper cutting, brushing glue → upper wall 裱 paste, patchwork, lap joint, flower → pressure adhesive bubble → wipe the glue → trimming.

Precautions for applying furniture paper:

1. The grass-roots treatment must be cleaned, smooth, and smooth. The moisture-proof coating should be painted evenly and not too thick.

(1) Concrete and plaster base: The wall surface is cleanly cleaned, and the surface cracks and pits are leveled with putty. Full of putty, polished flat. Determine the number of scraping passes as needed.

(2) Wood base: The wood base should be planed, free of burrs, sputum, and no exposed nail heads. Seams and nails are filled with putty. Full of putty, polished smooth.

(3) Gypsum board base: The gypsum board joints are treated with caulking putty and are fastened with seam tape. Putty on the surface.

2. Brushing primer is generally used 107 glue, primer at once survived, but there can be no omission.

3. In order to prevent wallpaper and wall cloth from falling off, apply a layer of moisture-proof paint.

4. Play vertical and horizontal lines to ensure that wallpapers and wall coverings are horizontal and vertical with correct patterns.

5. When the plastic wallpaper meets the water, the glue will swell. Therefore, it is necessary to moisten the paper with water to fully inflate the plastic wallpaper. The wallpaper, wall covering, etc. of the glass fiber base material will not expand or contract with water, and the paper will not need to be moistened. Composite paper wallpaper and textile fiber wallpaper should not be stuffy.

6. After pasting, press the adhesive on the wallpaper to leave no bubbles, and the extruded glue should be cleaned in time.