First, wet paste

1, measure the size of the sticker;

2, cut stickers;

3, pre-post, measuring the size of the cropped sticker is appropriate, trim;

4, using a hand-held spray can spray liquid to the object;

5, remove the protective layer of the sticker, cover the sticker and flatten it (faster);

6. Scrape excess liquid and gas with a scraper;

7, wait, about a day to dry.

Second, dry stickers

1. The size of the sticker has been determined in advance;

2. Select two points on the sticker, the two points being the longest distance of the sticker;

3. Uncover the protective layer of the two points, about 1cm----2cm;

4, will uncover that point of protection layer folded to the edge of the sticker. "Outside" is very important;

5. Stick the sticker on the sticker. In fact, only the two points are posted:

6, will be in the "outside" of the protective layer along the direction of the stickers drawn, while smoking pressure;

7, the final needle stamp, then press the bubble. carry out.

Third, imitation wood grain paper furniture cleaning and maintenance methods

1. Place it in a stable position to prevent damage to the blink structure.

2. Do not expose to the sun to prevent deformation.

3, should not be placed in a humid and non-ventilated place, otherwise it is easy to get wet and deteriorate.

4, large wardrobes and other furniture, the top of the cabinet can not put heavy objects, otherwise it is easy to make the door frame deformation.

5. The furniture made of plywood should not be washed with water to prevent the degumming of the plywood. Generally, the stains can be removed by washing. Severe stains can be removed by using a vanguard.

6. If the furniture has cracks, apply the putty and pigment to mix well and then flatten it to prevent the crack from extending.

7. Put some pepper, camphor, or tobacco leaves in the furniture to prevent rats and mites from entering.

8. Avoid washing with alkaline water and boiling water to prevent damage to the paint surface.

9. If the surface of the furniture is stained with alkaline water or stains, wipe it off with water and then apply light wax.